D-Link DHP-P500AV/DHP-P501AV User Manual. Page 14: Using The Setup Wizard Using the Setup Wizard Follow the simple steps below to run the Setup Wizard to guide you quickly through the installation process. Insert the D-Link DHP-P500AV CD into your CD-ROM drive. . PowerLine DHP-(P)308AV Powerline Mini Adapter x2. Quick Install Guide and Warranty Documents. CD/ROM with user manual. Ethernet RJ45 CAT5x2 Cable x2. Overview of hardware: Step 1 – Insert one DHP-(P)308AV into a wall socket near to your router or at least within a distance for the RJ45 Cable supplied to be connected.
The D-Link DHP-306AV adapter uses standard AC wiring to distribute Ethernet connectivity within the home. By simply plugging one PowerLine adapter into an existing electrical socket, you can turn every power outlet into a potential network connection, making the DHP-306AV an ideal solution for sharing a high-speed Internet connection or for connecting computers, HD media players, game consoles and Network Attached Storage to your home network.
200Mbps Transmission with Quality of Service
Delivering data transfer rates of up to 200 Mbps1, D-Link’s PowerLine Homeplug AV provides ample bandwidth for demanding digital home requirements, such as watching Internet TV or streaming digital music in any room. Advanced technology built into this adapter makes it more resistant to electrical interference from other household appliances, so users can fully benefit from the maximum transmission speeds. Conveniently Connect You can attach a switch or wireless Access Point (AP) to a D-Link PowerLine Homeplug AV Network Adapter, allowing you to connect multiple devices in the farthest corners of your home. Furthermore, D-Link’s Powerline Homeplug AV implements 128-bit AES encryption for securing your connection and keeping your data safe from intruders. You can set this up easily via the button on the side of the adapter. Compatibility Based on the industry-leading Atheros Homeplug AV technology, the adapter is compatible with other brands’ devices based on the same Homeplug AV standard. However, it will not work with devices based on other standards, such as D-Link’s DHP-302/342. D-Link Green™ The adapter is part of D-Link Green, D-Link’s program for providing eco-friendly alternatives without compromising performance: if data transmission or reception does not occur over a certain period of time, the adapter will automatically go into sleep mode to save power. This requires less than 1W, making the adapter among the first of its kind to comply with the European Union guideline on Energy-using Products (EuP), applicable since 7th January 2010. 1 Maximum throughput based on theoretical data rate. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic and network overhead may lower actual throughput rate.
The D-Link DHP-306AV adapter uses standard AC wiring to distribute Ethernet connectivity within the home. By simply plugging one PowerLine adapter into an existing electrical socket, you can turn every power outlet into a potential network connection, making the DHP-306AV an ideal solution for sharing a high-speed Internet connection or for connecting computers, HD media players, game consoles. D-Link DHP-P306AV User Manual 12 Section 3 - Configuration Follow the simple steps below to run the Setup Wizard to guide you quickly through the installation process. Insert the D-Link DHP-P306AV CD into your CD-ROM drive. If the CD Autorun function does not automatically start on your computer, click Start.
Specs
Downloads can vary across product revisions. Please select the correcthardware revision.
Installation Considerations Powerline:
• Plan the location of Powerline devices • Connect the Powerline devices to electrical outlets that are not controlled by a wall switch to prevent accidental turn off power to the device. • Do not connect the Powerline devices to an extension cord, surge protector or power strip, as this will prevent it work Correctly or reduce network performance. • Avoid using the Powerline devices into an electrical outlet located near a device that uses a lot of energy, such as a washer, dryer or refrigerator. This could prevent the adapter to function properly or have a negative impact on network performance. • This device cannot be managed or setup using Web GUI. • This device cannot be found by the Powerline Utility.
Once all of the above have been considered, we can commence with the configuration
This documentation is common to both DHP-308AV and DHP-P308AV. For this reason we’ll use the reference DHP-(P)308AV. D Link Dhp P326av User Manual Pdf
What comes with the box?
• PowerLine DHP-(P)308AV Powerline Mini Adapter x2 • Quick Install Guide and Warranty Documents • CD/ROM with user manual • Ethernet RJ45 CAT5x2 Cable x2 ![]()
Overview of hardware:
Step 1 – Insert one DHP-(P)308AV into a wall socket near to your router or at least within a distance for the RJ45 Cable supplied to be connected. Wait until the power LED is a FIXED green light.
Step 2 – Insert into one port of your router an Ethernet RJ45 Cable and the other end into the DHP-(P)308AV Step 3 – Once connected you should be seeing the following LEDs
These mean that there is Power Supplying the DHP-(P)308AV and also there is Ethernet Connectivity with the router
Step 4 – To ensure there will be a Powerline connection between the 2 devices, insert the second DHP-(P)308AV into a wall socket near the first.
Step 5 – Press and hold the 'Simple Connection Button' for 2 seconds on both devices. You will notice their 'Power LED” flashing. Once the 'Power LED” has stopped flashing, you should see the following LED formation on the first DHP-(P)308AV:
This will mean that there is Power Supplying the DHP-(P)308AV, Powerline Connectivity and also Ethernet Connectivity with the router. On the second DHP-(P)308AV you should see the following LED formation:
This will mean that there is Power Supplying the DHP-(P)308AV, Powerline Connectivity but no Ethernet Connectivity.
Step 6 – To test the connectivity, connect one end of the second Ethernet CAT5 cable into the second DHP-(P)308AV and connect to a PC, laptop or MAC. Configure the PC or laptop to receive an IP from the router by the following steps
Step 7 – Change Network Adapter: Microsoft Windows: Start > Control Panel > Network and Sharing Center > Change adapter settings > Local Area Connection – right-click on this icon > Properties – select and double click on > Internet Protocol Version 4 (TCP/IPv4)
The above settings are ideal for receiving an IP from the router. Once you know your network details, you may change them to a static IP.
MAC OS:
System Preferences > Network > Network and Sharing Center > Change adapter settings > Local Area Connection
The above settings are ideal for receiving an IP from the router. Once you know your network details, you may change them to a static IP. Step 7 – When connection is made, you will see the following LED formation:
Step 8 – You may now put the second DHP-(P)308AV in another location of the house
130 people found this useful.
Did you find this useful?
130 people found this useful.
D-link Dhp-p326av User Manual
Thank you for your feedback.
Sorry we couldn't help! Click here for more FAQs or go to Support.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
November 2020
Categories |